Product CodeNom. Size

General Description

T3 Ladder Tray System is designed for trapeze supported or surface mounted cable management and is ideally suited to small to medium size cables as TPS, data comms and sub mains allowing for more tie off points as well as tighter radius bends and risers. T1 offers full integration with our T3 Ladder Tray system saving the installers from having to carrying two ranges of accessories.

  • Material 0.65mm thick
  • 3m length
  • 50mm sides
  • 45mm cable lying depth
  • 11mm tie off centres
  • Site fabricated fittings
  • Flat and peaked cover option

Available Finishes

  • Galvabond
  • Powder coated
  • Zinc Passivated
  • Stainless steel

Technical Information

Load and Deflection data is derived from tests performed in a NATA certified testing environment in accordance to ME<A VE1-2009 Standards.

All ladders exceed the class designation that has been applied to the product.

Load data is based on single spans resulting in worst case scenario. Deflections listed in our table are based on continuous spans, single span installation will result in increased deflection. for single spans multiply the corresponding deflection by 2.5 for further information regarding Nema VE 1-2209 Standards.